A family roofing company serving Alcoa and the rest of Tennessee through our network of local crews. Tin roofs, repairs and replacements done right.
Pick a service to see how we handle it and what the job usually looks like on a Alcoa roof.
If two other people have caulked it and it still leaks, call us. Most stubborn leaks turn out to be flashing, a valley, or a fastener nobody thought to check.
Removing the ice is the easy half. We also look at ventilation and insulation so it stops happening every January.
Guards installed as part of a roof job or on their own. Either way we check the hangers and the pitch while we are up there.
Low slope roofs fail at the joints and around anything that sticks through them. That is where we start, not out in the middle of the field.
This is the work our name is attached to. Two decades of tin roofs on houses, churches, barns and additions, installed by crews who cut the trim on site instead of forcing something that almost fits.
A replacement is a big spend and it should feel orderly. We schedule around dry weather, work in the right order, and never leave a house open overnight.
Storm damage does not wait for business hours. We get the opening closed, photograph it for your insurance, and put the real fix on the schedule.
Metal, shingle and low slope work on buildings where a leak costs you more than a wet ceiling. Free estimates, same as anywhere else.
Reflective coatings keep a metal roof cooler in summer and seal up the small stuff before it turns into a leak.
Not every hailstorm ruins a roof. We look before we tell you anything, and if the damage is only cosmetic we will say that too.
Backed out screws, split washers, rust starting at a seam, a panel lifted at the eave. These are our roofs, and most of the time a repair is all it takes.
Wind and debris damage is not always obvious from the ground. We check the edges, the ridge, the valleys and the fasteners before telling you anything is fine.
Hard wind lifts shingles and works panel fasteners loose along the edges, which is exactly where the next storm gets underneath. We refasten, replace and reseal.
A shingle repair should not be visible from the street. We match as close as the weathering allows and blend the new work into the old.
A careful walk over the whole roof — panels, shingles, valleys, flashing, fasteners — plus the attic side when there is a way in. You get photos and a straight answer.
The layer you never see is what keeps water out on the ugly days. We do not thin it out to save a few dollars on a bid.
Old skylights leak at the flashing long before the glass ever fails. We reflash, reseal, or set a new unit and tie it in properly.
An older roof deserves to keep its character. We repair rather than replace wherever the material still allows it.
The edge of a roof is where most trouble starts. New fascia, new soffit, wrapped or painted so it stays sound.
Lifted panels, missing shingles, flashing that has given up where the chimney comes through. We find what is actually wrong, fix that, and leave the rest of your roof alone.
Roofing Brothers began in 2002 as a family roofing company in Morganton, North Carolina, and it is still run the way it started. Homeowners in Alcoa reach that same outfit — the one that has been setting metal panels and laying shingles for over twenty years — through our network of local crews.
In a city the size of Alcoa, word travels fast about who does good work and who does not. That suits us fine. We would rather put one roof on right and have the neighbors ask about it than chase volume all over Tennessee.
Nothing fancy — free estimates, honest answers, and roofs that go on straight.
The same family started this company putting metal roofs on neighbors houses in 2002. It has never been sold, franchised or handed off to a call center.
A few backed out screws or a whole roof off a church — we take both. No job is too small to get the same crew and the same care.
Around twenty standard metal colors, and the chart comes out with the estimate so you can hold it up against your siding and shutters before you commit.
Somebody comes out, measures, gets on the roof, and leaves you a written price. No charge, no obligation, and no number that expires if you do not sign today.
You get a start date and we hold to it. If weather moves your job we call you, rather than leaving you watching the driveway.
Common questions from Alcoa, TN homeowners about metal roofs, repairs and what a roof costs.
Often, yes. Plenty of the Alcoa roofs we get called to look at need flashing reworked or a section refastened, not a whole new roof. We will tell you honestly which one you are looking at, and if it is repairable we would rather repair it.
A metal roof installed properly on a Alcoa home should give you 40 to 60 years, and standing seam often goes longer because there are no exposed fasteners. Screws and sealants on a panel roof want attention around year 20, which is a small job next to a re-roof.
Sometimes. If the decking is sound and there is only one layer of shingles, a Alcoa metal roof can go over the top on purlins. If there is rot underneath or two layers already on, we tear off first — and we will tell you that before you sign, not halfway through.
Plenty of them. Most Alcoa customers choose from around twenty standard colors, and green, burgundy, bronze, black, gray, tan and barn red are the ones people pick most. We bring the color chart out with the estimate so you can hold it up against your siding.
For most Alcoa homes, yes. A metal roof costs more up front than shingles, but it usually outlives two or three shingle roofs, sheds rain and snow better, and does not peel off in a hard wind. We will price metal and shingle side by side so you can compare real numbers instead of guessing.
Yes. Gutters, guards, soffit and fascia are all part of keeping the edge of a Alcoa roof dry, so we handle them along with the roof instead of sending you off to find somebody else to finish the job.
We would rather let the work, and the people who paid for it, do the talking.
"New gutters and guards after they did our roof. No more climbing up there every October to dig out pine needles by hand."
"Thank you so much to the entire crew at Roofing Brothers for our amazing new tin roof! You were amazing to work with and I couldn't recommend you to others enough! Great communication, pricing, color options, efficiency, and HONESTY! If anyone needs a new roof, I highly recommend this crew! Phenomenal job."
"Standing seam on our log home. The panels are dead straight and the ridge work is clean. You can tell they have done a few of these."
Looking for a roofer just outside Alcoa? These areas are covered too.